Bedgear M3 Performance (1.0 Medium-Firm) vs Titan Plus Elite
These two are close substitutes on paper — the spec table below shows where they differ. Every number below comes from published teardowns and spec sheets (see our methodology); prices are queen-size, refreshed 2026-09-04.
Bedgear M3 Performance (1.0 Medium-Firm) vs Titan Plus Elite: full spec table
| Spec | Bedgear M3 Performance (1.0 Medium-Firm) | Titan Plus Elite |
|---|---|---|
| Type | Hybrid | Hybrid |
| Firmness | 6/10 | 6/10 |
| Height | 12.75" | 14" |
| Queen price | $2,500 | $2,499 |
| Price range (all sizes) | $2,500–$3,200 | $1,699–$2,732 |
| Foam densities (lb/ft³, top → bottom) | 2.5 / 1.5 / 2.6 / 2.5 | 1.5 / 2.5 / 2.5 |
| Coil gauge | 15.5 | — |
| Coil count (queen) | — | — |
| Cooling | 6/10 | 6/10 |
| Motion isolation | 6/10 | 6/10 |
| Edge support | 7/10 | 8/10 |
| Pressure relief | 8/10 | 8/10 |
| Support | 8/10 | 9/10 |
| Natural materials | 3/10 | 4/10 |
| Notable features | Modular design with swappable firmness panels, Ver-Tex cooling cover, Dual-gauge zoned coil core, Built for temperature-sensitive athletes | Built for heavier and plus-size sleepers, 14" flagship pillow-top build, Microcoil comfort layer over 13.5-gauge coils, Medium-firm feel with deep cushioning |
| Spec source | NapLab | NapLab |
Key differences
- On the published specs these two are close substitutes — similar firmness, price, and construction. Decide on current price, trial length, and returns policy.
Who the Bedgear M3 Performance (1.0 Medium-Firm) is for
The Bedgear M3 Performance (1.0 Medium-Firm) has a medium feel that works for many side and back sleepers, and for combination sleepers who switch positions.
- Excellent pressure relief at the shoulders and hips
- Strong, even support that keeps the spine aligned
Check current Bedgear M3 Performance (1.0 Medium-Firm) price →
Who the Titan Plus Elite is for
The Titan Plus Elite has a medium feel that works for many side and back sleepers, and for combination sleepers who switch positions.
- Excellent pressure relief at the shoulders and hips
- Strong, even support that keeps the spine aligned
- Sturdy edges that make the full surface usable
SquishMat may earn a commission if you buy through links on this page, at no extra cost to you. Commissions never influence which mattresses we recommend. How we make money
Frequently asked questions
Which is firmer, the Bedgear M3 Performance (1.0 Medium-Firm) or the Titan Plus Elite?
They rate the same: both are a 6/10 on the firmness scale, a medium feel that works for many side and back sleepers, and for combination sleepers who switch positions.
Which is cheaper, the Bedgear M3 Performance (1.0 Medium-Firm) or the Titan Plus Elite?
The Titan Plus Elite is cheaper in a queen: $2,499 versus $2,500, as of 2026-09-04.
What is the main construction difference between the Bedgear M3 Performance (1.0 Medium-Firm) and the Titan Plus Elite?
Both are hybrid builds with similar published specs — the differences come down to feel and price rather than construction. The full layer-by-layer comparison is in the table above.
See how both stack up against every bed we track in the full comparison matrix, or dig into the complete specs for the Bedgear M3 Performance (1.0 Medium-Firm) and the Titan Plus Elite.