The Bedgear M3 Performance (1.0 Medium-Firm) from Bedgear is a hybrid mattress with a medium feel that works for many side and back sleepers, and for combination sleepers who switch positions.
Inside the Bedgear M3 Performance (1.0 Medium-Firm)
Bedgear M3 Performance (1.0 Medium-Firm)
12.75" tall
Bedgear · Hybrid · Firmness 6/10
Hover or tap a layer to slide it out
Layer breakdown
Polyfoam comfort layer
1″ thick · 2.5 lb/ft³ density
Measured at 2.5 lb/ft³ — high-density foam like this resists softening and body impressions, one of the strongest longevity signals in a build.
Polyfoam transition layer
2″ thick · 1.5 lb/ft³ density
At 1.5 lb/ft³ this foam sits under the ~1.6 lb/ft³ we'd want from polyfoam — low-density foam tends to soften and take body impressions sooner, especially under heavier sleepers.
Polyfoam transition layer
1″ thick · 2.6 lb/ft³ density
Measured at 2.6 lb/ft³ — high-density foam like this resists softening and body impressions, one of the strongest longevity signals in a build.
Coil support core
7″ thick · 15.5-gauge steel
An open coil core is the best airflow a mattress can have — body heat vents out instead of building up.15.5-gauge coils are thinner wire — a softer, springier core, though under heavier sleepers it can give up support sooner.
Polyfoam base layer
1.75″ thick · 2.5 lb/ft³ density
Measured at 2.5 lb/ft³ — high-density foam like this resists softening and body impressions, one of the strongest longevity signals in a build.
Hover or tap a layer to see what it means for comfort and durability.
SquishMat may earn a commission if you buy through links on this page, at no extra cost to you. Commissions never influence which mattresses we recommend. How we make money
Compare the Bedgear M3 Performance (1.0 Medium-Firm)
