The ThermoBalance LX Elite (Medium) from Brooklyn Bedding is a hybrid mattress with a medium feel that works for many side and back sleepers, and for combination sleepers who switch positions.
Inside the ThermoBalance LX Elite (Medium)
ThermoBalance LX Elite (Medium)
16" tall
Brooklyn Bedding · Hybrid · Firmness 6/10
Hover or tap a layer to slide it out
Layer breakdown
Polyfoam comfort layer
2.75″ thick · 1.5 lb/ft³ density
At 1.5 lb/ft³ this foam sits under the ~1.8 lb/ft³ we'd want from polyfoam — low-density foam tends to soften and take body impressions sooner, especially under heavier sleepers.
Memory foam transition layer
1″ thick · 3.5 lb/ft³ density
Measured at 3.5 lb/ft³ — clears the ~3.2 lb/ft³ durability bar we'd hold memory foam to even under heavier (200 lb+) sleepers.
Polyfoam transition layer
1″ thick · 2.1 lb/ft³ density
Measured at 2.1 lb/ft³ — clears the ~2 lb/ft³ durability bar we'd hold polyfoam to even under heavier (200 lb+) sleepers.
Aerated latex transition layer
1.5″ thick · 5.3 lb/ft³ density
Latex resists softening and body impressions far longer than comparable foams — a durability plus at any body weight.Aerated latex — the holes molded through this layer keep air moving, so it sleeps cooler than most foams.
Polyfoam transition layer
0.75″ thick · 1.5 lb/ft³ density
1.5 lb/ft³ foam runs light, but a 0.75″ slab like this is too thin to drag durability down.
Coil support core
8″ thick · 13.5-gauge steel
13.5-gauge steel — thicker wire than most, built to carry heavier sleepers without giving up support.An open coil core is the best airflow a mattress can have — body heat vents out instead of building up.
Polyfoam base layer
1″ thick · 1.5 lb/ft³ density
Measured at 1.5 lb/ft³ — solid polyfoam for average-weight sleepers, though heavier (200 lb+) sleepers would want closer to 1.8 lb/ft³ here.
Hover or tap a layer to see what it means for comfort and durability.
Total height16"
What it does well
Excellent pressure relief at the shoulders and hips
